ResMed AirSense 10 CPAP with Integrated Humidifier

$758.00

100 in stock

The ResMed AirSense™  10 CPAP is designed for the treatment of sleep apnea and is intended for both home and hospital use.

Please email prescriptions to rx@mysleepap.com with your order # in the subject line.

Compare
SKU: 37203 Category:

The ResMed AirSense™  10 CPAP is designed for the treatment of sleep apnea and is intended for both home and hospital use. It has a wide variety of patient comfort features to ensure a comfortable night’s sleep. With a full color LCD, the AirSense™ 10 CPAP is user-friendly. Simply press start, or use SmartStart™, which automatically starts air pressure after you breathe into the mask.  It also features AutoRamp™, which helps you fall asleep by starting with a lower initial pressure, while increasing to your prescribed pressure over a custom 0-45 minute range. Its integrated humidifier provides thorough continuous humidification during the night for a better night’s sleep. Breathing is even easier with EPR™. This patented technology lowers air pressure during exhalation, and increases it during inhalation, facilitating a more natural breathing pattern, and with a noise level of only 27 dBA, you’ll have your best night’s rest every night.

Be the first to review “ResMed AirSense 10 CPAP with Integrated Humidifier”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Additional information

Product content

CPAP Machine
Built-In HumidAire Heated Humidifier
Standard Humidifier Chamber
SlimLine Tubing – 15mm Diameter
Power Supply and Cord
Travel Bag
Patient Manual
1- Standard Filter (Installed)
Filter Cover

Weight - Machine with Water Chamber

2.75 lbs (44 oz.)

Dimensions - Machine with Water Chamber

10.04 in L x 4.57 in W x 5.91 in H

Weight - Standard Chamber

.54 lb

Weight - Machine with Side Cover (Without Water Chamber)

Approx. 2.452 lbs

Dimensions - Machine with Side Cover (Without Water Chamber)

Approx. 8 in L x 4.57 in W x 5.91 in H

Dimensions - Travel Bag

13.24 in L x 10 in W x 5 in H

Weight - Travel Bag Alone

1.18 lb

Weight - Machine with Humidifier; Power Supply and Cord; OPTIONAL ClimateLineAir Tube; Travel Bag

Approximately 5.25 lbs

Sound Level

26.6 dBA

Water Chamber Capacity

380 mL

Weight - 90W Power Supply, Cord and Plug

1.29 lb

Dimensions - 90W Power Supply Only (Not including Cor or Plug)

5 1/2 in x 1 7/8 in x 1 1/4 in

AC Input Range - 90W Power Supply

100 – 240V, 50 – 60Hz, 1.0 – 1.5A, Class II

DC Output - 90 W Power Supply

24V — 3.75A

Typical Power Consumption

53W (57VA)

Peak Power Consumption

104W (108VA)

Operating Pressure

4 – 20 cm H2O (0.2 cm increments)

Length - SlimLine Tubing

6 feet

Materials - SlimLine Tubing

Flexible Plastic

Materials - Standard Water Chamber

Injection Molded Plastic, Aluminum , Silicone Seal

Materials - Dishwasher Safe Water Chamber

Injection Molded Plastic, Stainless Steel, Silicone Seal

Materials - Standard Filter

Polyester non-woven fiber

Temperature Range - Optional ClimateLineAir™ Heated Tube

60 – 80° F (16 – 30° C)

Operating Temperature

41° F – 95° F (5° C – 35° C)

Storage and Transport Temperature

-4° F – 140° F (-20° C – 60° C)

Operating Humidity

10% – 95% Relative Humidity, non-condensing

Storage and Transport Humidity

5% – 95% relative Humidity, non-condensing

Operating Altitude

Sea Level – 8500 Feet (2,591 M); Air pressure range 1013 hPa – 738 hPa

Maximum Temperature - Heating Plate

154° F (68° C)

Maximum Temperature - Cut Out

165° F (74° C)

Maximum Gas Temperature

Less than or Equal to 106° F (? 41° C)

IEC 60601-1:2005 Classification

Class II (Double Insulation), Type BF, Ingress protection IP22

Machine Warranty

2 Years

Patient Weight

Greater than 66 lbs

Cleaning Instructions

The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber should not be washed in a dishwasher or washing machine. The SlimLine hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask.

Required Settings

1 Pressure Setting is Required

Humidifier Features

AutoRamp™ with sleep onset detection
Easy-Breathe waveform with EPR™
Small, lightweight, portable design
Continuous humidification for optimal patient comfort
SmartStart™/Stop feature

Warranty

The products sold by MySleepap.com® are backed by manufacturer warranties that protect you against manufacturer defects of materials and craftsmanship. Products under warranty are subject to a return validation. This inspection will determine if the damage can be repaired or if the product needs to be fully replaced.  Water damage issues will not be considered for warranty replacement by the manufacturer.

How to Return Your Warranty Equipment
Contact mysleepap.com if you believe your CPAP equipment is defective and not working properly. If a return of your product(s) is approved, an return authorization number will be issued to you, a note in the return package stating what the problem seems to be should be included. Please contact us via email: info@mysleepap.com or by telephone.

A MySleepap.com agent can answer all your questions on how to send your defective equipment to:

Harmony Healthcare Supplies
info@mysleepap.com
626-462-1400
34 E. Huntington Dr, Arcadia, CA 91006

International Customers Warranty Information
International Warranty eligibility follows the same guidelines above. Warranty and repair claims on CPAP and BiPAP/BiLevel machines that are purchased from MySleepap.com and shipped internationally must be shipped back to our company in the United States for any warranty or repair claim.

Warranty Details For CPAP, BiPAP, Auto CPAP, APAP BiLevel Machines And Humidifiers
  • ResMed: 2 Years
  • Philips Respironics: 2 Years
  • Fisher & Paykel: 5 Years
  • DeVilbiss: 5 Years
Warranty Information for CPAP Masks
Please note this applies to products with manufacturer defects in material and does not apply to normal wear and tear. Please refer to your owner’s manual for proper care instructions and maintenance for a longer life span of your CPAP mask and accessories. Warranty for manufacturers defects is as follows:
  • ResMed: 90 Days
  • Philips Respironics: 90 Days
  • Fisher & Paykel: 90 Days
  • Devilbiss: 90 Days

Main Menu

ResMed AirSense 10 CPAP with Integrated Humidifier