Philips Respironics Amara View Full Face CPAP Mask with Headgear – Fit Pack
- Brand: Philips Respironics
- SKU: 1090670
Philips Respironics Amara View Full Face CPAP Mask with Headgear – Fit Pack is a less invasive full face mask constructed to seal under the nose and around the mouth. The traditional forehead support has been eliminated from the design to provide comfort. Enjoy a wide open view, read a book, or watch television while wearing the Amara View. All cushion sizes are included with the Fit Pack to help the user obtain the optimal fit.
Open View Design
The Amara View Full Face CPAP Mask is supported by headgear which extends from the front of the mask frame to the crown of the head. Headgear adjustments can be made to ensure the mask has a strong seal under the nostrils and around the mouth. With the mask properly positioned, the forehead support is no longer needed. The minimal contact design offers a wide range of visibility, making it easier to watch television and to read before bed. Those who suffer from claustrophobia may find comfort in the Amara View.
Original Nasal Cushion
A rectangular opening found at the top of the full face cushion, is intended to deliver the necessary pressure without irritating the nostrils. Gently glide the nostril opening under the nose to find the intended fit. Please Note: The user must keep their nose above the hole to prevent CPAP therapy from being impaired.
Short Tube with Elbow and Swivel
Respironics’ short tube for Amara View Full Face Mask extends from the mask frame and connects to the cuff of the CPAP hose. The built-in elbow attaches to the mask frame, while the swivel connects to the user’s CPAP hose cuff. The swivel’s 360 degree motion lessens the pull on the CPAP hose and increases flexibility and mobility, which may result in a stronger seal throughout the night.
Universal Mask Frame & All Cushion Sizes Included
The Amara View mask frame offers a universal fit for all cushion sizes including: Small, Medium, and Large. Since the Fit Pack offers all three cushion sizes, it is easy to attach each cushion to the frame in order to find the perfect fit. This feature is convenient, allowing cushions to be tested and replaced without the purchase of a new mask system. When a replacement cushion is needed, select the exact cushion and replace.
Adjustable Headgear with Magnetic Headgear Clips
The Amara View mask features an unique headgear design with five adjustment points. Four adjustment points are found around the mask frame. The crown strap which crosses directly over the top of the head to form a halo shape has the additional adjustment point. This design is intended to promote a more secure grip and a more even distribution of pressure.
Waking in the middle of the night can be frustrating, but the magnetic headgear clips are constructed to maintain the shape of the headgear throughout sleep therapy, even when the mask is removed. With one swift motion, the clips are used to rapidly attach and detach the Amara View CPAP mask. Just apply a little pressure, and they pop right off.
-Open View Design
|Weight - Amara View Full Face CPAP Mask with Headgear (Including All Parts)||
|Weight - Mask Frame||
|Weight - Short Tube||
|Weight - Headgear (Standard Size)||
|Weight - Headgear Clips||
|Measurements - Short Tube||
14.5 inches excluding connections
|Measurements - Headgear (Standard Size)||
-Lower Strap: 7.5 in L x 0.75 in W excluding quick release tabs
|Measurements - Headgear Clips||
1.5 in L x 1 in W x 0.5 in H
-4 degree F to 140 degree F (-20 degree C to 60 degree C)
|Storage Relative Humidity||
15% to 95%, non-condensing
|Inspiratory Resistance with Anti-Asphyxia Valve Open to Atmosphere at 50 SLMP||
|Expiratory Resistance with Anti-Asphyxia Valve Open to Atmosphere at 50 SLMP||
|Anti-Asphyxia Valve Closed to Atmosphere||
A sustained minimum pressure of 3 cm H2O is required to ensure the valve closes.
|Anti-Asphyxia Valve Open to Atmosphere||
The valve will open when pressure is no longer detected.
WarrantyThe products sold by MySleepap.com® are backed by manufacturer warranties that protect you against manufacturer defects of materials and craftsmanship. Products under warranty are subject to a return validation. This inspection will determine if the damage can be repaired or if the product needs to be fully replaced. Water damage issues will not be considered for warranty replacement by the manufacturer. How to Return Your Warranty Equipment Contact mysleepap.com if you believe your CPAP equipment is defective and not working properly. If a return of your product(s) is approved, an return authorization number will be issued to you, a note in the return package stating what the problem seems to be should be included. Please contact us via email: email@example.com or by telephone. A MySleepap.com agent can answer all your questions on how to send your defective equipment to: Harmony Healthcare Supplies firstname.lastname@example.org 626-462-1400 34 E. Huntington Dr, Arcadia, CA 91006 International Customers Warranty Information International Warranty eligibility follows the same guidelines above. Warranty and repair claims on CPAP and BiPAP/BiLevel machines that are purchased from MySleepap.com and shipped internationally must be shipped back to our company in the United States for any warranty or repair claim. Warranty Details For CPAP, BiPAP, Auto CPAP, APAP BiLevel Machines And Humidifiers
- ResMed: 2 Years
- Philips Respironics: 2 Years
- Fisher & Paykel: 5 Years
- DeVilbiss: 5 Years
- ResMed: 90 Days
- Philips Respironics: 90 Days
- Fisher & Paykel: 90 Days
- Devilbiss: 90 Days